Clear covered ptfe hose AN8 for brake system
Each brake line is covered with a wear-resistant PVC sleeve to protect the pipe from dust and water (should be removed at the end to suit installation)
With the passage of time and hard use for a long time, the standard rubber brake line will usually expand under the pressure generated when the brake is applied. This continuous expansion will stretch the rubber hose to a point where it can no longer provide the required performance over a long period of time. The steel braid is not affected by this expansion property, so providing more consistent performance during braking helps to eliminate brake fade and produce a more consistent brake pedal feel, which will far exceed the last OEM rubber hose and look better
No. | Inner diameter | Outer diameter | Tube Wall Thickness |
Working pressure | Burst pressure | Minimum bending radius | Specification | sleeve size | ||||||
(inch) | (mm±0.2) | (inch) | (mm±0.2) | (inch) | (mm±0.1) | (psi) | (bar) | (psi) | (bar) | (inch) | (mm) | |||
ZXGM112-04 | 3/16" | 4.8 | 0.358 | 9.1 | 0.033 | 0.85 | 2936 | 203 | 11745 | 810 | 2.953 | 75 | -3 | ZXTF0-03 |
ZXGM112-05 | 1/4" | 6.4 | 0.409 | 10.4 | 0.033 | 0.85 | 2646 | 183 | 10585 | 730 | 3.189 | 81 | -4 | ZXTF0-04 |
ZXGM112-06 | 5/16" | 8.0 | 0.512 | 13.0 | 0.033 | 0.85 | 2429 | 168 | 9715 | 670 | 3.622 | 92 | -5 | ZXTF0-05 |
ZXGM112-08 | 3/8" | 10.0 | 0.591 | 15.0 | 0.033 | 0.85 | 1958 | 135 | 7830 | 540 | 4.331 | 110 | -6 | ZXTF0-06 |
ZXGM112-10 | 1/2" | 13.0 | 0.701 | 17.8 | 0.039 | 1.00 | 2272 | 113 | 6818 | 450 | 7.165 | 182 | -8 | ZXTF0-08 |
ZXGM112-12 | 5/8" | 16.0 | 0.854 | 21.7 | 0.039 | 1.00 | 1233 | 85 | 4930 | 340 | 8.307 | 211 | -10 | ZXTF0-10 |
ZXGM112-14 | 3/4" | 19.0 | 0.969 | 24.6 | 0.039 | 1.00 | 1015 | 73 | 4205 | 290 | 338 | -12 | ZXTF0-12 | |
ZXGM112-16 | 7/8" | 22.2 | 1.091 | 27.7 | 0.039 | 1.00 | 870 | 60 | 3480 | 240 | 421 | -14 | ZXTF0-14 | |
ZXGM112-18 | 1" | 25.0 | 1.220 | 31.0 | 0.039 | 1.50 | 798 | 55 | 3190 | 220 | 539 | -16 | ZXTF0-16 |